Model 8
& 8F Collector
Model 12
Collector
Model 15
Large Capacity Collector
Model
25/Maximum Capacity
Remote Vac™
A Manicured Finish Every Time You Mow.
Large capacity PowerVac™
collection systems deliver a clean sweep and give a
clog-free performance even in adverse conditions. The
deck-driven vac moves a high volume of air which carries
wet grass, high-moisture leaves, pine straw and
dethatching debris through the collector tube. The
force of the cutting blades discharges clippings and
debris directly into the trash-ingesting steel
impeller greatly reduces and compacts debris
blown into the collector. Collection systems are
rear-mounted to retain maneuverability, offer
maximum
visibility and create a cleaner environment for
engine and operator.
Pull-A-Pin PowerVac Collection System™
For conversion to non-collection operation, simply release
belt tension, pull one pin, detach the vac unit and
install the discharge shield with the same pin.
Model 8 & 8F Collector
Model 8F features twin slide-in mesh bags and a
reinforced fabric top. The Model 8 (not shown) is
equipped with either single or twin slide-in mesh bags
and a metal top.
Model 12 & 12F Collector
Designed for use with Grasshopper 600 Series mowers, the
Model 12 features a 12-cu.ft. capacity and a
lever-actuatedmetal hopper with tapered
collector bottom which is emptied from the operator's
seat. The Model 12F features triple slide-in mesh
bags and a reinforced fabric top.
Model 15 Large Capacity Collector
The most popular vacuum system, the 15-cu.ft.
collector features a lever-actuated metal hopper
with tapered collector bottom which can be emptied
from the operator's seat.
Model 25/Maximum Capacity
Designed for clipping and leaf pickup on large
acreages of relatively level terrain, the 25-cu.ft.
Model 25 cuts mowing/pickup/dumping cycle time.
Trailing mount utilizes a "fifth wheel" hitch
configuration to retain zero-radius
maneuverability. The lever-actuated hopper can be
dumped from the operator's seat. Model 25 can also
be direct mounted on 700 and 900 series models.
Remote Vac™
The PTO-driven Remote Vac™ utilizes a Quik-D-Tatch
Vac® assembly mounted in place of the deck. A
flexible, 12-foot-long, 6-inch-diameter hose with
hand-held swiveling nozzle rotates 360° to
vacuum leaves and other debris from hard-to-reach
areas. Compacts debris for easier handling,
then deposits it into any PowerVac Collection
System™.
Bishop Tractor and Equipment Ltd.
20485 Leslie Street Queensville Ontario LOG 1RO
905-478-4257
visibility and create a cleaner environment for
engine and operator. 
